Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Mark Roberts New member Username: Markr Post Number: 41 Registered: 03-2007 Rating: N/A Votes: 0 Posted on Thursday, November 12, 2009 - 08:45 pm:    What causes this type of error? What can I do to correct it? I am opening a .gc file created by VCarve Pro v.5, and am simply opening it in KCAM. I see the errors flashing on the bottom of the screen, and when I open the error file I get every line (almost) of code looking like this small snippet: 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: M06T1 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0Z0.5000 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0X0.0000Y0.0000S16000M03 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0X1.5107Y2.2980Z0.2000 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1Z-0.0315F30.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1X1.5156Y2.3211Z-0.0246F100.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1X1.5156Y2.3211Z-0.0246F100.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0Z0.2000 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0X1.8029Y2.5726 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1Z-0.0251F30.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1X1.8035Y2.5765Z-0.0231F100.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1X1.8035Y2.5765Z-0.0231F100.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0Z0.2000 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G0X2.2507Y2.9459 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1Z-0.0418F30.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1X2.2590Y2.9352Z-0.0361F100.0 11/12/2009 18:44:39 Error Description: NIST_Block_Interpretor_Error: G1X2.2590Y2.9352Z-0.0361F100.0 Etc. Etc... 6800 lines worth. What do I need to change in KCAM to import this better, or does it effect anything in the actual running of the Gcode? Thanks! Mark

Administration Log Out