Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Tom Aiken New member Username: Tom_aiken Post Number: 6 Registered: 08-2007 Rating: N/A Votes: 0 Posted on Monday, August 27, 2007 - 09:45 am:    Further to the above I tried adding this: ..... N016 G01 Y000.1455 N017 G01 X000.000 N018 G01 Y000.1805 N019 G01 X0 N020 G01 Y0 N021 G01 Z0 N022 F18.0 N023 M60 N024 F18.0 N025 G01 X0 G01 Y0 G01 Z0 N026 F18.0 N027 G01 X006.000 G01 Y000.2155 Hoping that the first 3 motion line (N25) would be the same as the previous three lines and the error in speed would not affect anything. Instead I now get the machine trying to drive at 180 or more IPM at the three motion line and beyond (N25). At this point I am totally baffled. Is there a file that needs to be saved or deleted or modified? Does the MaxStepper need to be reset every time? I have tried this and it doesn't change things. What am I missing? thanks Tom

Administration Log Out