| Author | Message | ||
     Lauri Koponen New member Username: Lokey Post Number: 11 Registered: 05-2009 Rating: N/A |
Greetings, I removed my flash drive from the USB when I was cutting a part and the cutting speed increased a lot. It may not work for everyone but it really increased my KCAM cutting speed when I am cutting a part. Cheers. | ||
| thomas p perrigo III New member Username: Tom2983usa Post Number: 13 Registered: 05-2008 Rating: N/A |
it is always better to run your k cam programs with everything else turned off, cuz other prog. run in background and if they get busy ie internet connection your processor cant keep up esp. if your processor is under 2.0 gig. the faster the processor the better 2.8 gig + and memory above 1 gig really helps .i built a hard drive with only k cam on board with my cad cam and xp sp3 | ||
| Iain McFetridge New member Username: Iain Post Number: 62 Registered: 10-2007 Rating: N/A |
And thats where Max Stepper comes in. My machine never chokes anymore with Max Stepper! |
