| Author | Message | ||
     Michael Burton New member Username: Rccnc Post Number: 17 Registered: 05-2007 Rating: N/A |
Kelly, Whats the price for the Upgraded firmware chip? When will it be available? Thank you, Michael | ||
| Kelly Ullrich Moderator Username: Kellyu Post Number: 124 Registered: 02-2007 Rating: N/A |
I think it will cost $20 if you exchange your current chip. I will place purchase options on the Purchase web page when ready. | ||
| Donald R Beliveau New member Username: Donrus Post Number: 68 Registered: 01-2007 Rating: N/A |
Hi... Kelly I must have missed something.... What will the upgrade consist of? Thank you. | ||
| Kelly Ullrich Moderator Username: Kellyu Post Number: 125 Registered: 02-2007 Rating: N/A |
I fixed some things in the MaxStepper Firmware. You can see the release notes in the KCam folder if you install the latest version of KCam(.24). If Max works for you now, you won't see and big changes. Mostly I fixed the inverting options for the inputs and outputs of Max. If you are one who needed to add an inverter to a limit switch or an enable line, this upgrade will fix that. It also reverses the direction of the motors properly now without the need to rewire the motors. |
