| Author | Message | ||
     Matthew Wills New member Username: Blacksmith Post Number: 3 Registered: 10-2007 Rating: N/A |
Not even sure I'm asking a question that makes sense but here goes. I downloaded Freemill and have been sending .stl files to it and then having it generate G-Code. Which of the post processors is closest to KCAM? Does KCAM use a specific version of G-code? Thanks, Matt | ||
| Kelly Ullrich Moderator Username: Kellyu Post Number: 178 Registered: 02-2007 Rating: N/A |
Try this: free mill post processor It was created years ago. I hope it still works. | ||
| Matthew Wills New member Username: Blacksmith Post Number: 4 Registered: 10-2007 Rating: N/A |
Thanks Kelly! Will give that a try. Regards, Matt | ||
| Alwyn McLeod New member Username: Cintsa47 Post Number: 3 Registered: 04-2011 Rating: N/A |
does Kcam have a post processor for plasma cutting? | ||
| Kelly Ullrich Moderator Username: Kellyu Post Number: 533 Registered: 02-2007 Rating: N/A |
The short answer is no. I personally don't use milling programs just CAD programs. When ever post processor requests come up, someone familiar with the mill program usually finds a post processor that functions with KCam. |
